{"product_id":"craft-express-shin-guard-heat-press-attachment-sublimation","title":"Craft Express Shin Guard Heat Press Attachment, Curved Insert for Sublimation","description":"\u003ch2\u003eBring personalized artwork to curved shin guard projects\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eCraft Express Shin Guard Heat Press Attachment\u003c\/strong\u003e is a curved insert intended for sublimation customization of compatible shin guard blanks. Build your project around player names, numbers, team-inspired artwork, or a personalized gift, using a verified attachment, press, and blank combination.\u003c\/p\u003e\u003cp\u003eImagine preparing matching designs for a group of players, then aligning each transfer on a supported curved blank. This attachment is intended to support that specialized workflow, rather than treating a curved shin guard like a flat panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor sublimation, not UV DTF.\u003c\/strong\u003e This is an attachment listing, not a complete heat press or a listing for finished shin guards. Confirm the supported machine and supplied components before ordering.\u003c\/p\u003e\u003ch3\u003eProject benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved project format:\u003c\/strong\u003e Intended for shin guard sublimation rather than pen decoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalization possibilities:\u003c\/strong\u003e Plan names, numbers, logos, and custom artwork on suitable sublimation-ready blanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialized setup:\u003c\/strong\u003e Pair the insert with the exact press and guard profile approved for it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocused workflow:\u003c\/strong\u003e Use attachment-specific instructions instead of adapting unrelated pen-press or vacuum-tray procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications and buying checks\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eAvailable information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eCraft Express Shin Guard Heat Press Attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eCurved insert for shin guard customization\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDecoration process\u003c\/td\u003e\n\u003ctd\u003eSublimation; not UV DTF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eCEHBPJ-HD-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported press models\u003c\/td\u003e\n\u003ctd\u003eNot verified by the available attachment-specific guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions and curve profile\u003c\/td\u003e\n\u003ctd\u003eNot supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported guard sizes and loading capacity\u003c\/td\u003e\n\u003ctd\u003eNot supplied; do not assume all S\/M\/L guards or a pair fit simultaneously\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting and electrical requirements\u003c\/td\u003e\n\u003ctd\u003eConnector, mounting, voltage, wattage, and control requirements are not supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded components\u003c\/td\u003e\n\u003ctd\u003eA complete inventory of heaters, holders, cables, fasteners, and accessories is not supplied. Confirm what accompanies the attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating settings\u003c\/td\u003e\n\u003ctd\u003eNo verified attachment-specific temperature, time, pressure, or peel recipe is supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility guide\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eItem or process\u003c\/th\u003e\n\u003cth\u003eCompatibility requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShin guard blanks\u003c\/td\u003e\n\u003ctd\u003eUse blanks approved for sublimation and matched to the attachment’s actual dimensions, curvature, support, and heat process\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCraft Express heat press\u003c\/td\u003e\n\u003ctd\u003eConfirm the exact model and revision with Craft Express. Brand name alone does not establish compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3D heat press or vacuum system\u003c\/td\u003e\n\u003ctd\u003eOlder description wording mentions these systems, but does not establish a supported pairing or installation method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8-in-1 or 3-in-1 press\u003c\/td\u003e\n\u003ctd\u003eReferences in the supporting fields belong to pen-attachment instructions and do not verify compatibility with this shin guard insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSublimation ink and paper\u003c\/td\u003e\n\u003ctd\u003eUse a compatible transfer system with a verified recipe for the exact blank and attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV DTF\u003c\/td\u003e\n\u003ctd\u003eNot the intended process for this attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther fixtures or ovens\u003c\/td\u003e\n\u003ctd\u003eNo interchangeability with separate shin guard holders, vacuum trays, or oven workflows is established\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003ePlan your sublimation project\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eConfirm the attachment identity, exact supported press, required components, and correct manual before purchase or installation.\u003c\/li\u003e\n\u003cli\u003eVerify the shin guard blank’s size, curve, coating, and suitability for the approved heat process.\u003c\/li\u003e\n\u003cli\u003eObtain the complete installation and operating procedure. Do not use the pen-attachment wiring or mounting steps found in the older supporting fields.\u003c\/li\u003e\n\u003cli\u003ePrepare artwork to the blank’s verified printable area and print with the approved sublimation ink and paper, following the system’s orientation requirements.\u003c\/li\u003e\n\u003cli\u003eInstall and load only as directed by the correct attachment manual, including its power-off, cooling, alignment, support, and protection requirements.\u003c\/li\u003e\n\u003cli\u003eUse the verified temperature, time, pressure, transfer-securing method, and paper-removal procedure for that exact combination.\u003c\/li\u003e\n\u003cli\u003eFollow the specified cooling and handling procedure, then inspect a test piece before repeating the process.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo numeric recipe is provided here because attachment-specific settings have not been established. Do not borrow a recipe from a standalone shin guard blank, a silicone holder, a pen press, or a convection-oven process.\u003c\/p\u003e\u003ch3\u003eImportant instruction clarification\u003c\/h3\u003e\u003cp\u003eThe separate Features, Instructions, and FAQ currently describe a pen attachment, including ten-pen capacity and installation on 8-in-1 or 3-in-1 presses. Those details do not describe or validate this shin guard attachment. Obtain the correct product-specific manual before installation or operation.\u003c\/p\u003e\u003cp\u003eThe older description calls the item both a heat element and an insert, without sufficient specifications to establish its heating, support, or connection arrangement. Confirm the supplied assembly rather than assuming it is a standalone heater, passive holder, or complete system.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this for sublimation or UV DTF?\u003c\/strong\u003e\u003cbr\u003eIt is intended for sublimation, not UV DTF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a complete press included?\u003c\/strong\u003e\u003cbr\u003eThis is an attachment listing. A complete press is not itemized as included; confirm the supplied components before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich press models fit?\u003c\/strong\u003e\u003cbr\u003eAn exact supported model list is not established. Confirm your press model and revision directly with Craft Express.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill every shin guard size fit?\u003c\/strong\u003e\u003cbr\u003eUniversal fit is not established. Attachment dimensions, curve profile, guard-size range, and loading capacity are not supplied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat settings should I use?\u003c\/strong\u003e\u003cbr\u003eObtain the verified recipe for the attachment, press, blank, ink, and paper combination. No attachment-specific numeric settings are supplied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I follow the ten-pen instructions?\u003c\/strong\u003e\u003cbr\u003eNo. Those supporting instructions refer to a different attachment and do not verify this item’s mounting, wiring, capacity, or operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use an oven or vacuum-tray recipe?\u003c\/strong\u003e\u003cbr\u003eNo equivalent workflow is established. Use the procedure specifically approved for this attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes personalization verify the guard’s protective performance?\u003c\/strong\u003e\u003cbr\u003eNo protective certification or post-decoration performance information is supplied. Confirm approved decoration limits with the guard manufacturer.\u003c\/p\u003e\u003cp\u003eStart with the correct equipment pairing and verified process, then create personalized sublimation artwork for compatible curved shin guard blanks.\u003c\/p\u003e","brand":"Craft Express","offers":[{"title":"Default Title","offer_id":44438534652079,"sku":"CEHBPJ-HD-1","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0456\/9009\/3735\/files\/Shin_Guard_Heat_Press_Attachment_-_Craft_Express_-_-7022687.jpg?v=1793923985","url":"https:\/\/craftexpressus.com\/products\/craft-express-shin-guard-heat-press-attachment-sublimation","provider":"Craft Express","version":"1.0","type":"link"}