OtterPro DTF Powder: Superior Adhesion for Vibrant and Durable Transfers - 1 Kg

Print Your Design: Use your DTF printer to print the desired image onto DTF film.

Apply the Powder: Evenly sprinkle OtterPro DTF Powder onto the printed film while the ink is still wet. Ensure complete coverage of the design area.

Remove Excess Powder: Gently shake off any excess powder from the film, ensuring only the design area retains the powder.

Cure the Powder: Place the film in a curing oven or use a heat press to melt the powder until it forms a cohesive layer.

Position the Transfer: Place the cured film onto your chosen fabric, ensuring the design is correctly aligned.

Heat Press the Design: Set your heat press to the recommended temperature and time settings for your specific fabric type. Press the design onto the fabric, applying firm pressure.

Peel the Film: Allow the film to cool (for cold peel) or peel it immediately (for hot peel), depending on the film type used.

Final Touch: For enhanced durability, consider pressing the garment again with a protective sheet for a few seconds.

Do I need to pretreat fabrics before using OtterPro DTF Powder?

No, pretreatment is not necessary. The powder allows DTF transfers to adhere directly to various materials without additional preparation. 

Which fabrics are compatible with this DTF powder?

OtterPro DTF Powder works well with cotton, nylon, silk, polyester, canvas, denim, and other fabrics. 

How should I wash garments with DTF transfers to maintain their quality?

To extend pattern vibrancy, turn your clothing inside out before washing.