Craft Express 6 Pack 12" x 12" Plywood Sheets – Sublimation & Laser-Ready Wood Blanks

Sublimation-Ready Coated Surface

White-coated top layer ensures vivid color and sharp detail—perfect for full-color sublimation designs

Laser Engraving Friendly

Cleanly engrave logos, patterns, names, or cut custom shapes with diode or CO₂ laser machines

12" x 12" Square Format

Perfectly sized for wall signs, trays, photo plaques, and DIY home décor projects

Strong Yet Lightweight Plywood Core

Durable enough for engraving and cutting, yet light enough for hanging and framing

6 Pack for Batch Projects & Custom Orders

Ideal for personalization shops, event signage, gifts, and creative resale inventory

For Sublimation:

Print your mirrored design with sublimation ink on sublimation paper.

Place the sheet face up, align your design, and tape down securely.

Press at 385°F (195°C) for 60–70 seconds with medium pressure.

Peel hot or cold depending on your paper type, and let cool flat.

For Laser Engraving:

Place sheet on your laser bed and focus the laser to surface height.

Use LightBurn or similar software to design and position your artwork.

Adjust speed/power settings based on your laser type and cut depth.

Engrave or cut, then clean with a dry cloth or gentle sanding if needed.

✨ Pro Tip: For sublimation, pre-press the sheet for 5 seconds to remove moisture and avoid ghosting.

Can I sublimate directly onto these sheets?

Yes! These plywood blanks are coated specifically for sublimation—just print, press, and peel for full-color results.

What type of laser works best on these?

They’re compatible with diode and CO₂ laser machines and ideal for engraving, scoring, or cutting with proper settings.

Do the edges burn when cut with a laser?

Minimal scorching may occur depending on power/speed settings—use a honeycomb bed and air assist for best results.

Are both sides coated?

The sublimation coating is typically on one side. The reverse side may have a natural finish for versatility.