





Craft Express White Bottle Openers, Sublimation Bar Tool Blanks
Turn a practical bar accessory into a personalized gift with Craft Express White Bottle Openers, Sublimation Bar Tool Blanks. These flat stainless steel openers feature a glossy white sublimation coating on one side, ready for names, logos, quotes, and original artwork.
Choose options






Description
Turn a practical bar accessory into a personalized gift with Craft Express White Bottle Openers, Sublimation Bar Tool Blanks. These flat stainless steel openers feature a glossy white sublimation coating on one side, ready for names, logos, quotes, and original artwork.
Create coordinated groomsmen gifts, wedding favors, promotional giveaways, or custom bar merchandise. Choose a 4-, 12-, or 24-pack for your project, then decorate the coated face to give each opener its own identity.
What’s included & what to check
| Detail | Product guidance |
|---|---|
| Pack choices | 4-Pack, 12-Pack, or 24-Pack in the current selector. Select your required count; separate features mentioning four do not describe every pack option. |
| Material | Stainless steel with a glossy white sublimation-ready coating on one side. |
| Decoration face | Only the white-coated side is intended for sublimation. The reverse is plain metal. |
| Packaging | Openers are packed together as a set, not individually packaged. Plan separate gift packaging if needed. |
| Dimensions | Overall length, width, thickness, and printable-area measurements are not provided. Measure the actual opener before sizing artwork or choosing a jig. |
| Separate supplies | A compatible sublimation printer and ink, transfer paper, heat-resistant tape, suitable heat equipment, and any support pad or jig required by your setup. |
Compatibility & sublimation press settings
| Step or requirement | Opener-specific guidance |
|---|---|
| Direct sublimation | Supported on the glossy white-coated face only. No direct-sublimation compatibility is established for the plain metal back. |
| Equipment | The product instructions specify a flat press or accessory jig. Confirm dimensional fit and support; no particular press model or jig is identified. |
| Artwork preparation | Print your design mirrored using sublimation ink and paper. Align it on the white side and secure with heat-resistant tape. |
| Temperature | 385°F / 195°C, as listed in the product instructions. |
| Time & pressure | 60 seconds with medium pressure. |
| Support | The instructions suggest a silicone mat or pressing pillow underneath to help distribute pressure and avoid imprint lines. Follow your equipment’s layering guidance. |
| Peel & cooling | Peel immediately after pressing, then allow the opener to cool before handling or packaging. |
Check artwork clearance around the opener’s edges and openings rather than treating the entire outline as an uninterrupted print area. Test one piece before producing a batch, using these settings alongside your equipment and transfer-paper instructions. Protect yourself from the hot metal during transfer removal.
Prepare your personalized barware project
Secure artwork where instructed with heat-resistant thermal tape. Review protective sublimation butcher paper for protective layers appropriate to your press setup. For another personalized drinkware gift option, explore white ceramic sublimation mugs, following their own application instructions rather than the opener settings. Linked products are sold separately.
Before ordering: Choose the pack count you need, allow for separate presentation packaging, and confirm the actual dimensions if artwork size or jig fit is critical. These are undecorated blanks, not finished personalized gifts. Cleaning and dishwasher instructions are not supplied in the current product guidance; confirm care requirements before including them with finished gifts.

