Craft Express 4 Pack Narrow Heat Resistant Tape – 0.2 Inches x 33m for Sublimation
Keep transfer preparation focused with Craft Express Narrow Heat Resistant Sublimation Tape – 4 Pack. Each roll is listed as approximately 0.2 inches [5mm] wide × 108 Feet inches long. Cut the length you need to help secure compatible transfer paper or film to an approved blank before heating.
Choose options
Description
A narrow strip for carefully placed designs.
Keep transfer preparation focused with Craft Express Narrow Heat Resistant Sublimation Tape – 4 Pack. Each roll is listed as approximately 0.2 inches [5mm] wide × 108 Feet inches long. Cut the length you need to help secure compatible transfer paper or film to an approved blank before heating.
Picture aligning a name on a gift mug or positioning a small design on a sublimation blank. The slim strip lets you plan attachment points where space is limited, without assuming a wider piece is needed. After getting the layout right, use the tape as one part of the blank’s complete transfer process.
Why choose this narrow tape?
- Slim attachment width: Approximately 0.2 inches [5mm] for planning tape placement around smaller transfer areas.
- Four-roll supply: Keep extras available for individual gifts or small-batch work.
- Cut-to-length format: Each roll is approximately 108 Feet long.
- Listed heat resistance: Product details state a maximum of 482°F (250°C), subject to the approved process and exposure duration.
- Designed for clean removal: Test the exact coating, fabric, transfer, and heating cycle rather than assuming residue-free release on every surface.
Specifications and buying details
| Detail | Product information |
|---|---|
| Included | 4 rolls of narrow heat-resistant tape |
| Listed width | Approximately 0.2 inches [5mm] |
| Listed length | Approximately 108 Feet per roll |
| Maximum temperature stated | 482°F (250°C) |
| SKU | CEJD168-BL |
| Application guidance | Apply firmly to secure compatible transfer paper or film; avoid stretching the tape |
| Removal guidance | Let cool briefly, then remove smoothly, subject to the complete blank-and-transfer procedure |
| Unspecified details | Backing material, adhesive composition, thickness, core size, rated heat-exposure duration, reuse rating, and shelf life |
The listed maximum temperature is a ceiling, not a pressing target or unlimited-duration heat rating. No exposure-time specification is supplied. Dispensers, blanks, transfers, wraps, and heat equipment are not listed as included.
Project compatibility guide
| Project or material | What to confirm |
|---|---|
| Sublimation transfer paper and blanks | Adhesion, approved tape placement, coating compatibility, heating duration, and removal stages for the exact setup |
| Mugs and tumblers | Curved-surface use is listed. Check the actual coating, transfer layout, and complete heating method; narrow width does not guarantee hold on every curve |
| HTV | Named in the existing details, but no specific film or garment procedure supplied. Check whether additional tape is permitted and where it can be placed |
| DTF | Named use. Follow the exact film, garment, heating, and peel instructions rather than a generic tape-based recipe |
| UV DTF | Mentioned in the FAQ, but this does not establish a heat-application requirement. Follow the decal’s own process; do not heat or bake UV DTF because heat-resistant tape is listed |
| Delicate, painted, or unfamiliar surfaces | Test adhesion and removal on an appropriate sample before using on a finished item |
| Oven application | No oven-specific procedure is supplied for this product. A temperature ceiling alone does not establish approval for a complete oven-and-wrap process |
Placement support is not a pressure system
Tape helps retain transfer placement. It does not replace a fitted shrink sleeve, silicone wrap, heater, or other pressure arrangement required by the blank’s instructions. No universal guarantee against shifting, ghosting, lifting, residue, or surface damage is established.
How to prepare and use
- Confirm the actual width and compatibility with the transfer, blank, heating method, temperature, and exposure time.
- Obtain the complete application procedure, including tape placement, protective layers, pressure, and removal sequence.
- Prepare and align the transfer according to the blank’s instructions.
- Cut suitable tape lengths and apply firmly at approved attachment points without stretching the tape.
- Check the setup on a sample before repeating a batch.
- Heat using the approved blank-and-transfer recipe, not the tape’s maximum temperature as a target.
- Follow the correct paper-peel, wrap-removal, and cooling stages. The tape’s general Instructions call for brief cooling before smooth removal; this does not override a blank-specific removal requirement.
- Inspect the design and surface before repeating the process.
Storage and handling
Store in a cool, dry space as directed. No numerical storage range or shelf life is supplied. Reuse performance is not specified, so do not assume a previously heated strip retains its original adhesion. Heat-resistant tape is not heat-protective clothing, flame protection, or verified electrical-insulation material.
Frequently asked questions
How many rolls are included?
Four rolls, each listed as approximately 108 Feet long.
Is the width approximately 0.2 inches [5mm]
The title and detailed specifications say approximately 0.2 inches [5mm].
What is the listed heat limit?
482°F (250°C). No rated exposure duration is supplied, so verify the full process rather than treating the limit as a universal setting.
Can I use it on curved drinkware?
The FAQ lists mugs and tumblers. Check the exact surface, attachment points, and heating procedure, then test the setup.
Does it replace a wrap or sleeve?
No pressure-equivalence approval is established. Use the pressure arrangement required by the blank’s instructions.
Is clean removal guaranteed?
Clean release is a listed design feature, not a verified guarantee for every material and heating cycle. Test and remove at the approved stage.
When should I remove the tape?
The general Instructions say to let cool briefly, then remove smoothly. Coordinate that with the transfer and blank’s required peel and cooling stages.
Can I use the same strip again?
No reuse rating is supplied. Do not assume adhesion or heat performance remains unchanged after a cycle.
Is it only for sublimation?
HTV, DTF, and UV DTF are also named in the product details, but each needs its own approved process. UV DTF is not automatically a heated application.
Can I use it in an oven?
No complete oven-specific application procedure is supplied here. Confirm approval for the exact tape, blank, wrap, and exposure before use.
Check your process, secure the details, and keep your next compatible transfer project thoughtfully aligned.