Otter DTF Transfer Film – Double Sided Matte for Vibrant, Cold Peel Transfers

Double Sided Matte Coating

Matte on both sides for anti-slip, anti-curl stability—smooth feeding and static-free printing

Cold Peel for Clean Results

After pressing, let it cool and peel away cleanly—no ghosting, no fuzz, just flawless color transfer

Crisp, Vivid Output

Optimized coating for sharp detail, high-opacity whites, and vibrant color that pops on dark or light fabric

Works on Cotton, Polyester & Blends

Sticks beautifully to all major fabric types—expand your product line without changing supplies

Printer Friendly & Compatible

Ideal for Epson-based DTF printers, compatible with Otter DTF inks and hot melt powders

Print your design mirrored on the matte-coated side of the film using DTF inks (CMYK + White).

Apply hot melt powder evenly over the printed area while the ink is still wet.

Shake off excess powder and cure at 250–300°F (120–150°C) for 2–3 minutes using a heat press or oven.

Press onto fabric at 300–320°F (150–160°C) for 10–15 seconds with firm pressure.

Let cool completely before peeling off the film for a flawless cold peel result.

✨ Pro Tip: Store film flat and in a dry environment to avoid warping and moisture interference.

Can I use this film with any DTF printer?

It’s designed for Epson printhead-based DTF printers, but it also works with most systems that support standard DTF inks and RIP software.

Why choose double matte over single matte?

Double matte prevents curling and static, resulting in cleaner prints and smoother feeding through your printer.

Is this a hot peel or cold peel film?

It’s a cold peel film. Let the print cool after pressing, then peel for the cleanest finish.

Does it work with white ink?

Yes! This film supports CMYK + White printing for full-color transfers with strong base opacity.